Fix No Wi-Fi available after Windows 10 update

Many users report the issue that they come across after when they have upgraded their PC to the latest OS that is Windows 10. One such issue is the unavailability of a wireless network. In case the driver is outdated, you need to update all network drivers otherwise you will receive No Wi-Fi available Error. As stated by the device manager, it’s working properly and doesn’t require a new driver. The wireless drivers and every other online driver aren’t installed. In case the computer fails to connect wirelessly, visit the computer manufacturer’s website and discover the support page.

Here in this article, we are going to share how to Fix No Wi-Fi available Error in Windows 10. The issue could be with your service provider or perhaps your router is running slow, and an easy reboot could repair it. Owing to that interference, various problems might occur. After that, make certain it hasn’t caused any issues. As a result, in case you have difficulties with the digital adapter, you’ll have to reinstall it.

Methods to Fix Windows 10 Wi-Fi Not Available Issue

All your network settings are stored in the Windows registry, which means you may use the registry editor to modify network settings like the access to a wireless card. Windows 10 no connections are available is the major issue. Review your router’s documentation to make certain you are using the proper network settings when attempting to connect. By default, you will observe several of the settings turned on, and you may click through the screens turning off settings you don’t want. You might need to change the bit rate settings. Sometimes due to outdated drivers, you will face windows 10 won’t show available networks and windows 10 can’t find Wifi.

Recommended: Windows Update Not Working

You may be due for a modem upgrade, or there may be an additional problem at stake. Otherwise, ask your modem and router’s user manuals to determine if a further setup is needed. You may also choose which server to attach through. Now you must make certain that the server is started on boot. Click Connect straight to the Internet” if you aren’t using a proxy server. Some users say that the way to solve the problem will be only in the event the reboot in safe mode was made two or even 3 times. Under WPA2 encryption, as an example, the router password is case-sensitive and doesn’t contain spaces.

You may need to check back sometimes in the event the online slowdown is random. Hopefully, you are going to locate a suitable solution. Especially since it’s simple enough. Through the years there have been various procedures for combining Internet connections. There’s little doubt about it. Therefore, it would be recommended to run your security scan once more. Before getting too connected to the notion of downloading 1 billion bits of information per second, know that getting gigabit service and adjusting your set-up to attain top speeds is harder than you may think.

Method 1- Uninstall VPN Software or Registry Configuration

The older version of VPN may not be supported by Windows 10. If you have installed them then, the network won’t function properly. Hence uninstall the VPN software. Or you can try fixing registry configuration.

Step 1- Open Command Prompt as Admin.

Step 2- Enter command:

reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /VA /f

Step 3- Enter  command:

netcfg -v -u dni_dne

Step 4- Now restart  PC.

Method 2- Re-enter the Wi-Fi Password

Step 1- Open Settings – Network & Internet  -Choose the Wi-Fi tab from the menu.

Step 2- Choose Manage known networks.

Step 3 – Select the wireless SSID > Forget.

Step 3- Now reconnect your Wi-Fi > Enter the correct password.

Method 3- Diagnose the Wireless Network Adapter

Step 1- Use Win + X > Control Panel > Internet and sharing center > Network Connections.

Step 2- Right click on the wireless network adapter.

Step 3. Select enable if it is disabled.

Step 4. Now select Diagnose.

Then Windows will diagnose the wireless problem. Now follow the on-screen instructions to fix the issue successfully.

Method 4- Use Troubleshooter to Make Wi-Fi available

Step 1. Settings > go to the Update & security options.

Step 2- Choose the Troubleshoot > Internet Connections.

Follow the on-screen steps for repairing the wireless issue.

Method 5- Disable Power Management

Step 1- Right-click Start > Device Manager. Expand the Network adapters.

Step 2- Navigate to your wireless network adapter.

Step 3- Now select Properties> Power Management.

Step 4- Uncheck the Allow the computer to turn off.

Step 5- OK.

Method 6- Update Wi-Fi Adapter Drivers

Step 1- Run Driver Talent> Scan to fix driver problems.

Step 2- Click on Update or Repair.

Step 3- Reboot PC.

Now your wireless network connection is available.

I guess by now your Wi-Fi not available issue might have been resolved. All the methods are easy to follow and authentic. To begin fixing the issue now.